- Vertical Centrifugal Casting Machine
- Horizontal Centrifugal Casting Machine
- Turntable Centrifugal Casting Machine
- Cantilever Centrifugal Casting Machine
- Centrifugal Babbitt Lining Machine
- Duplexed Mill Roll Centrifugal Casting Machine
- Iron Pipe Centrifugal Casting Machine
- Piston Ring & Bearing Bushes Centrifugal Casting Machine
- Multi Station Centrifugal Casting Machine
- Cylinder Liner Centrifugal Casting Machine
- Centrifugal Casting Mold
- Magnesium Metal Reduction Retort Production Line
- Pidgeon Process Magnesium Metal Reduction Technology
Grey Iron Pipe Centrifugal Casting Mold
Mold Technical Specifications
Quality Material: 30CrMo
Chemical Compositions: C: 0.20-0.30%; Si: 0.20-0.40%; Mn: 0.20-0.40%; Cr: 0.18-1.20%; Mo: 0.20-0.30%; P: 0.015%max; S: 0.010%max.
Mechanical Properties: All molds to be forged in single piece, no welding.
Hardness: BHN=220-260
Tensile Strength: MPa: min.700
Yield Strength: MPa: min.600
Impact Strength: 180 akJ min.
Elongation: 12% min.
Reduction Area: 50% min.
Heat Treatment: Hardened and fully tempered
Inside Taper: Will be in steps
Surface Condition: Finishing Machining without honing
(Inside: 1.6-3.2 Ra, Outside: 3.2-6.3 Ra)
Radial Runout Tolerance: 0.15mm
Grey Iron Pipe Centrifugal Casting Mold Machining 
Grey Iron Pipe Centrifugal Casting Mold Machining 1 
Grey Iron Pipe Centrifugal Casting Mold 
3-Meter Grey Iron Pipe Centrifugal Casting Mold 
3-Meter Grey Iron Pipe Centrifugal Casting Mold 1 
3-Meter Grey Iron Pipe Mold with Socket 
Grey Iron Pipe Centrifugal Casting Mold 2 
Grey Iron Pipe Centrifugal Casting Mold 3 
Grey Iron Pipe Centrifugal Casting Mold 4 
Grey Iron Pipe Centrifugal Casting Mold 5 
Grey Iron Pipe Centrifugal Casting Mold 61 
Grey Iron Pipe Centrifugal Casting Mold 6 
Grey Iron Pipe Centrifugal Casting Mold 6 
3-Meter Grey Iron Pipe Mold with Socket 2 
3-Meter Grey Iron Pipe Centrifugal Casting Mold 2 
3-Meter Grey Iron Pipe Centrifugal Casting Mold 3 
Pipe Centrifugal Casting Mold with Socket 
Pipe Centrifugal Casting Mold with Socket 1