centrifugal casting machine belonging to the technical

The utility model discloses a multi-station centrifugal casting machine belonging to the technical field of casting equipment. The structure of the casting machine is: the driving system is connected with the coupling, the coupling is connected with the center pillar, the center pillar is connected with the station system, the station system has a casting station, a cooling station and a pipe station. Bit, pouring the bottom of the casting station. The utility model adopts centrifugal casting, the outer layer of the casting is compact, the non-metallic inclusions are less and the mechanical performance is good. With the three-station casting, compared with the single-station casting machine, when the casting station is in the molten metal, The operator can install the heat pipe while the cooling station mold is cooling, the work of the three stations is parallel and the work efficiency is improved.

The utility model belongs to the technical field of casting equipment, and in particular to a multi-station centrifugal casting machine.

At present, the use of gravity casting and die casting methods such as metal mold casting method to produce aluminum alloy heating plate, specifically the solid metal in the furnace electric furnace after melting, and then lift the melt from the furnace out of the delivery to the pouring place for casting To the hopper, cast castings have shrinkage, pores, slag, and fine organization, mechanical performance is not good.

The metal melting furnace and the centrifugal casting machine as a whole, to improve the quality of casting, but the machine and other centrifugal casting machine are used single-station casting mode, install the heating pipe and cooling station mold separately, the operation more cumbersome, low efficiency.

The purpose of the utility model is to provide a multi-station centrifugal casting machine. The castings cast by the casting machine have no shrinkage, pores, slag, and the organization is fine and the mechanical performance is good.


http://www.centrifugalcastmachine.com/News/112.html